This page describes a generic media mapping (i.e. rules for multiplexing) of "text codecs" into Ogg.
Text codecs are sequences of text chunks that have a timing relationship to an audio or video stream. This specification is restricted to use with codecs of Content-Type text/* in order to provide assurance that encapsulated data is appropriate to use in text processing applications, regardless of the particular text codec in use. Hence, we disallow use of non-text representations of e.g. subtitles, closed captions and even audio descriptions with this specification, since they provide less flexibility for display mechanisms, search indexing, and general processing.
We also only call a codec a "text codec" if it doesn't contain binary data, in particular images. Where images are needed, they should be referenced. This can be done through a URL and thus having the image external to the media data. It could also be done by embedding the image inside the Ogg stream in a different track to the text codec. This is outside this specification though.
Prominent examples of text codecs are:
- CC: closed captions (for the deaf)
- SUB: subtitles
- TAD: textual audio descriptions (for the blind)
- KTV: karaoke
- TIK: ticker text
- AR: active regions
- NB: metadata & semantic annotations
- TRX: transcripts / scripts
- LRC: lyrics
- LIN: linguistic markup
- CUE: cue points, DVD style chapter markers and similar navigational landmarks
These have been identified in a requirements study.
Four characters are reserved for codec type specification. Characters are to be given in ASCII.
Further text codec types can be defined on an as need basis, starting with "X-".
There are a multitude of existing open formats for specifying some of these - in particular for specifying closed captions and subtitles. They come in different complexities - some being simply a time stamp and a text, others providing for extensive styling, graphics, and motion of the text blocks over time.
No matter what the differences - when multiplexing such codecs into Ogg, they all have to solve the same problems. This is why this page describes generically how to multiplex text codecs into Ogg.
Text Codecs with existing, differing mappings into Ogg are:
These have been used as inspiration for the specification here. Also, in the stricter sense of "text codecs" as specified above, Kate is not a text codec, since it has the ability to encapsulate binary data inside Kate's data packets. Kate can however be used just for text, so it's a borderline codec.
Ogg codecs consist of a sequence of header packets and data packets.
Header packets contain information necessary to identify and set up the codec. Data packets contain the actual codec data, in this case the time-aligned text.
When these packets are multiplexed into Ogg, they are mapped to Ogg pages. In Ogg, there is a sequence of header pages, a sequence of data pages, and an EOS page, which finishes the stream. The pages have to be ordered non-decreasing with time. No data can come before any of the header pages or after the EOS page.
Text codecs have to take complete care of their layout. E.g. if srt is encapsulated into Ogg with this mapping, it makes sense to specify the relative screen region into which the srt text segments are to be rendered in an srt header page. Otherwise the media player has to make assumptions based on the codec type.
[Possibly it makes sense to define some default layout options for the different codec types.]
Header packets are a sequence of:
- one ident header, which identifies the codec
- one (optional) vorbis-comment header
- one or more secondary header packets that are codec specific
Any text codec has to map its header information into these header packets.
Header packets must appear in order and all header packets must appear before any data packet. Each header packet is encapsulated in one Ogg page.
A codec that wants to use this specification
The format of the ident header
0 1 2 3 | 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1| Byte +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | packtype | Identifier char: 'txt' | 0-3 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Identifier char: codec identifier | 4-7 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Version majorT| Version minorT| Version major | Version minor | 8-11 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Offset to message header fields | 12-15 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Number of header packets | 16-19 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Granulerate numerator | 20-23 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Granulerate denominator | 24-27 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Granuleshift | Padding / future use | 28-31 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Text type code | 32-35 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Message header fields: Content-type & Content-language | 36- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ... +-+-+
Fields with more than one byte length are encoded LSB (least significant byte) first.
As per the Ogg specification, granule positions of pages must be non decreasing within the stream. Header pages have granule position 0.
Description of the fields:
Each text codec page starts with a one byte type, just like this ident header. Similar to Kate, a type with the MSB set (eg, between 0x80 and 0xff) indicates a header packet, while a type with the MSB cleared (eg, between 0x00 and 0x7f) indicates a data packet. We use the packtype field in order to distinguish between the different header and data packet types.
The following packtypes are distinguished:
- 0x80 ID header (BOS page)
- 0x81 vorbis-comment header (optional)
- 0x82-0xff secondary header pages of the codec in an order defined by the codec (optional)
- 0x00 text data
- 0x01 keepalive
- 0x02 repeat
- 0x02-0x7f special data pages of the codec (optional)
- Text codec framework magic:
In all header pages, the packtype is followed by the text codec framework magic from byte offset 1 to byte offset 3 ("txt").
- Text codec magic:
The succeeding four bytes are used by the text codec to identify itself.
For example, when CMML moves to using this generic text codec mapping approach rather than its own, the first eight bytes of the ident header will identify the track as a CMML codec track through a signature string of "\200txtCMML".
Or as another example take a signature string of "\200txtsrt\0" which will identify srt being mapped.
Version majorT & minorT are fields that define the version of this text framework mapping. Right now, it is majorT = 1, minorT = 0. The Version major & minor fields are used by the text codec to define the version of its mapping.
- Offset to message header fields:
A 4 Byte unsigned integer that contains the number of Bytes used in this packet before the message header fields.
- Number of header packets:
A 4 Byte unsigned integer that contains the number of header packets of that particular logical bitstream consisting of the bos page and the secondary header pages.
- Granulerate numerator & denominator
A 4 byte unsigned integer each. They represent the temporal resolution of the logical bitstream in Hz given as a rational number. The default granule rate for text codecs is: 1/1000.
A 1 Byte unsigned integer describing whether to partition the granule_position into two for that logical bitstream, and how many of the lower bits to use for the partitioning. The upper bits signify a time-continuous granule position for an independently decodeable and presentable data granule. The lower bits are generally used to specify the relative offset of dependent packets, such as predicted frames of a video. Hence these can be addressed, though not decoded without tracing back to the last fully decodeable data granule. This is the case with Ogg Theora; the general procedure is given in section 3.2.
- Padding/future use
3 Bytes padding data that may be used for future requirements and are mandated to zero in this revision.
- Text type code:
A 4 Byte string signifying one of the text codec types as listed above. This provides information to the media player as to what kind of data to expect in the sequel.
- Message header fields
Message header fields follow the generic Internet Message Format defined in RFC 2822. Each header field consists of a name followed by a colon (":") and the field value. Field names are case-insensitive. The field value MAY be preceded by any amount of LWS, though a single SP is preferred. Header fields can be extended over multiple lines by preceding each extra line with at least one SP or HT. Message header fields are encoded in UTF-8, preferrably using US-ASCII code points.
Two message header fields are defined:
- Content-Type message header field, e.g. text/x-cmml, text/x-srt according to RFC 2045
- if no charset parameter is given, the character encoding defaults to UTF-8
- directionality of this text is implicitly given by the charset
- Content-Language, e.g. en-AU, de-DE according to RFC 4646 and http://www.iana.org/assignments/language-tags
Use of Skeleton
Text codecs must be used in conjunction with Ogg Skeleton.
Skeleton records information about a logical bitstream in a header called "fisbone". This specification defines that the granuleshift of the text codec is read from the Skeleton fisbone. Additionally, the following fisbone message header fields should be used:
- Content-Type, e.g. text/x-cmml, text/x-srt according to rfc2045
- if no charset parameter is given, it defaults to UTF-8
- directionality of this text is implicitly given by the charset
- Content-Language, e.g. en-AU, de-DE according to rfc4646 and http://www.iana.org/assignments/language-tags
- Text-Type, e.g. CC, SUB, etc (see abbreviations as defined above)
Data packets are generally the text data that is encapsulated into Ogg at a specific time.
For text codecs, large data packets, after being mapped into one or more Ogg pages, should be flushed. Small data packets that start at the same time, should be consolidated into one page. The insertion start time is encoded in the granule_pos of the Ogg page.
Since with text codecs we are talking about discontinuous codecs, there may be a long time between codec pages in a multiplexed stream. Therefore, optionally, the inclusion of keep-alive and/or repeat pages to be sent at regular intervals in the data stream is encouraged. This helps a decoder's seeking code to find a currently active text packet more easily.
Thus, the following data pages can be distinguished:
- ordinary data pages
- keep-alive pages
- repeat pages
The format of a Data packet
0 1 2 3 | 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1| Byte +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | packtype | filler / future use - 0 | 0-3 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Start Time | 4-7 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Start Time (continued) | 8-11 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | End Time | 12-15 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | End Time (continued) | 16-19 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Codec Data ... | 20-... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Fields with more than one byte length are encoded LSB (least significant byte) first.
- start / end time:
The Ogg framing header of a data page contains the start time encoded as a granule position in the higher bytes (see above). The lower bytes are used for seeking.
Therefore, the duration that a data page is on screen is not encoded in the encapsulation format. In CMML, the duration was set by creating pages that would end previously active pages. Here, instead, the duration is encoded directly into the data page.
For Ogg, only the end time would be required to be inserted into the data page, since the granule position encodes the start time. However, to be encapsulation independent, both start and end time are included. Both are specified in seconds from the start of the video and require 8 Bytes.
- codec data:
After that, the data of the text codec is included. This is preferably be without a repetition of the start and end time. For example, for srt, it makes sense to include just the subtitle text as codec data.
The EOS page ends a text codec stream. It can be an empty page, or contain the last data packet(s) of the text codec stream.
Text codecs are discontinuous codecs. The data packets are placed into the Ogg stream at the time where the data starts. Their duration is given inside the data packet. Thus, when seeking to a specific time offset in a Ogg file that has a text codec, it can be quite difficult to determine what text data should still be on screen.
The solution is to encode the time of the first text codec page that is still active into each text codec page.
Then, as you seek to a target time in the Ogg stream, you find the previous text codec page in the stream and from it the first still active text codec page. From that one, you have to gather all those text codec pages that are still active at the current time.
For this, the granulepos is separated into two parts, where one part signifies the insertion time of an earlier text codec page that is still active, and the second part contains the offset since then.
+-----------------+-----------------+ | prev_granule | offset | +-----------------+-----------------+
This is the same scheme as the one used in Kate and CMML, and similar to that used in Theora to reference keyframes. It is explained in more detail in the page GranulePosAndSeeking.
The size of this segmentation is stored in the 1 Byte integer granuleshift field of the Skeleton Fisbone. It describes how many of the lower bits to use for the partitioning.
The recommended granuleshift for text codecs is 24; it gives 34 years duration, and 4 hours max between pages, which should be sufficient for any long-form video annotation.
Selection of prev_granule
This algorithm clarifies the selection of "first still active packet" for prev_granule. It must be used by an encoder that is creating an OggText stream.
In the case of a text codec which does not allow overlapping data, such as CMML, the prev_granule is simply the insertion time of the previous text codec packet.
In the case where the active times of different data packets may overlap, an arbitrary number of packets may be active at the time of inserting a new data packet. The following specifies the encoder algorithm for choosing prev_granule for a packet's insertion at time t:
- Identify all packets that are still active at time t
- For each of these: select only the most recent repeat, or the original in the case of no repeats. This identifies the most recent representative for each currently-active packet
- Choose the earliest curr_granule of those representatives
The result of that procedure is then used for the prev_granule field of the new packet's granulepos, and the difference between that and the curr_granule is encoded in the offset of the granulepos:
granulepos = (prev_granule << granuleshift) | (curr_granule - prev_granule)
Repeat packets and Keepalives
Discontinuous codecs can be sparse. This means that "finding the previous text codec page in the stream" may require a lot of seeking backwards - it's essentially unbounded. Similarly, the gathering of "all those text codec pages that are still active at the current time" may take quite some time if, e.g. one page is constantly visible, such as a logo.
We bound the distance that needs to be searched in either direction through the use of keep-alives and repeat packets.
Repeat packets repeat all the data of an earlier packet which is still active at a certain point in the data stream. This avoids having to continue seeking to gain the information.
With the following rules we can achieve the goal of bounding the seek distance while accessing all data with the existing double-seek algorithm:
- Repeat packets are part of the stream structure; they must not be arbitrarily removed without re-encoding the granulepos of other packets in the stream.
- A repeat packet repeats the data of one specific earlier packet; we refer to it as a repeat of that packet
- In order to signify that multiple packets are still active, we use multiple repeat packets. They need not occur at the same time.
- Granulepos encoding: the curr_granule=(prev_granule+offset) of a packet is its insertion time. For a repeat packet, this is *not* its start_time. (However the start and end times are copied verbatim in the data header).
- Any packet may refer to a repeat packet in its prev_granule (including that repeat packets may refer to other repeat packets).
- The prev_granule of a repeat packet is the curr_granule of the earliest of the packets we've chosen to represent currently active events. This may not necessarily be the event with the earliest start_time.
- Repeat packets must not have a prev_granule of the packet they are repeating. If that is the only packet that is currently active, they must set prev_granule=curr_granule and offset=0.
The above rules bound the scrollback by the repeat frequency.
We consider an example of how this ensures that all active packets are found in the case where two packets A and B are active at a given time. After seeking to the desired time point, you scan forward from there and find a repeat packet for A: it must have a prev_granule encoded that refers to the packet B (and if packet B has been repeated, then A's prev_granule refers to the most recent repeat of packet B).
A keep-alive is essentially a packet, on a standalone page, that links back to an earlier still active text codec packet, but it is inserted frequently into the stream, e.g. at 30sec intervals, and thus provides a quicker way of seeking back to the required position. An optimisation is to add the positions of all still active text codec pages into the keep-alive packet to allow direct back-linking to all of them to gather the required information.
In order to bound the forward scan we use keepalives that specify that no packets are active. They must have prev_granule = curr_granule and offset = 0, and be in inserted the stream at the same repeat frequency.
Inserting keepalives or repeat packets into an existing stream will improve seekability by reducing the forward scan. If an update is also made to the granulepos of other packets which are byte-wise later in the file than the newly inserted keepalive or repeat packet, the scrollback of those packets will also be reduced.